Peugeot Citroën MYWAY Rneg Navigation Update + Firmware R50

The navigation and firmware update is suitable for the following models:

Peugeot

Peugeot 3008 (from 04/2009)
Peugeot 407 (from 2008)
Peugeot 5008 (from 10/2009)
Peugeot 807 (from 11/2008)
Peugeot Partner (from 2009) Peugeot Expert (from 2009)

Lemon

Citroën C3 (from 12/2009)
Citroën C4 Picasso (from 01/2009)
Citroën C3 Picasso (from 01/2009)
Citroën C4 (from 01/2009)
Citroën C5 (from 01/2009)
Citroën C8 (from 01/2009)
Citroën Jumpy (from 01/2009)
Citroën Berlingo (from 01/2009)

Citroën DS3 (from 02/2010)

How do you update the firmware?

1. Start the engine and insert the memory card with the firmware.

2. Wait for the system prompt for update and select 'yes' to start the update process.

3. DO NOT turn off the engine during the update, as this may cause the system error.

4. Your system may restart multiple times during the update. Wait until the process is complete and do not operate the controls.

5. The update process usually takes 30 minutes.

6. After the last restart, the system will ask to update again. Now select 'NO' and remove the SD card from your device.

7. The update is complete.

8. Check the firmware version: press and hold the 'SETUP' button for 5 seconds until the system menu appears. Check the installed firmware version R50.